Patterning Your Shotgun: How to See What Your Gun, Choke and Shells Really Do
Joseph McLain Nov 07, 2026

You buy a box of turkey shells that cost more than a nice dinner, screw in the choke tube the box recommends and head to the woods in April. A gobbler steps out at 35 yards, you squeeze the trigger, and he runs off. Was it your aim? The choke? The shell? Without a pattern sheet, you'll never know.
Is patterning only for turkey hunters? Don't broken clays and the box tell you enough? Turkey hunters do need it most, broken clays show you a lot, and the box is a reasonable place to start. But every gun, choke and shell combination throws its own pattern, and the only way to learn yours is on paper.
By the end you should know what a pattern is, how to set up a simple patterning session, how to count and read the results, and how to pattern for turkeys, pheasants and ducks at the distances you actually shoot, so you can choose a choke and load for a reason.
What a pattern is: The shape your shot makes downrange
When a shotgun fires, a cloud of pellets leaves the muzzle and spreads as it travels. A pattern is the picture that cloud leaves on paper at a given distance. Two things matter about that picture: where its center lands compared with where you aimed, and how evenly the pellets fill it.
Think of watering a garden with a hose nozzle. You can aim the spray at the tomatoes, but if the nozzle sprays left, the beans get wet instead. And even when it's aimed right, a worn nozzle can leave dry spots in the middle of the spray. A shotgun works the same way. The point of impact tells you where the spray goes. The pellet distribution tells you whether it has holes.
Chokes and shells change both. A tighter choke squeezes the shot more so the cloud stays smaller for longer. Harder or heavier pellets hold their shape and speed better and usually pattern tighter. Our article on shotgun chokes explains the choke side in detail. Patterning is how you find out what that theory looks like from your own barrel.
Key idea: Every barrel, choke and shell combination patterns a little differently. The label gives you a starting point; the paper gives you the answer.
The standard measure: Percent in a 30-inch circle at 40 yards
The traditional way to describe a pattern is the percentage of a shell's pellets that land inside a 30-inch circle at 40 yards. That's the measure behind the familiar choke names.
| Choke | Typical percent in 30-inch circle at 40 yards |
|---|---|
| Cylinder | About 40 percent |
| Skeet | About 45 percent |
| Improved cylinder | About 50 percent |
| Modified | About 60 percent |
| Improved modified | About 65 percent |
| Full | About 70 percent |
The table describes what a choke usually does, not a promise. A gun marked "modified" may throw 55 percent with one shell and 68 percent with another. That's exactly why you pattern. The 40-yard standard is useful for comparing combinations, but it isn't always the distance that matters for your hunting. For turkeys and close-flushing pheasants, you'll also pattern at the distances where you really shoot, which we cover below.
Setting up: What you need and how to stay safe
You don't need much. Get paper sheets at least 40 inches square, such as rolls of butcher paper or commercial pattern sheets, a sturdy backer like plywood or a frame, a marker, a tape measure or rangefinder, and a stable rest such as a shooting bench or sandbags. You'll also want a 30-inch piece of string tied to a marker so you can draw circles, and a notebook.
Choose a place where shooting is allowed and the backstop is safe. Shot can travel a long way past your target, especially larger pellets, so pick a range or a spot with a solid earthen backstop and nothing behind it you could hit. Wear eye and ear protection. Keep the gun unloaded with the action open while you walk downrange to hang or check paper, and agree with anyone helping you that no one touches a gun while someone is downrange.
Put a clear aiming mark in the middle of each sheet, like a 4-inch dot. Measure your distance from the muzzle to the paper, not from your toes. Shoot from a rest so you're testing the gun and the shell, not your swing. And shoot each sheet with one shot only, so you know which pellet holes belong to which shell.
Good practice: Label every sheet before you shoot it: distance, choke, shell brand, shot size, payload and the date. Ten minutes later every sheet looks alike, and an unlabeled pattern teaches you nothing.
Reading the paper: Center, count and holes
Find the center
Don't center your 30-inch circle on your aiming dot. Instead, look at the sheet and find where the pellets are densest, then draw the circle around that. Now compare the center of the circle with your aiming dot. If the dense part is 6 inches high and 4 inches left, that's where your gun shoots for you. A shotgun that shoots a little high is common and often helpful for rising birds. One that shoots a foot left is a problem worth solving, whether through gun fit, sights or a gunsmith.
Count the pellets
To figure the percentage, you need to know how many pellets were in the shell. You can look up average counts per ounce for each shot size, or cut a shell open over a bowl and count. Then count the holes inside your circle, crossing each one off with a marker as you go. Divide the hits by the total and you have your percentage. Splitting the circle into quarters with two lines makes counting easier and shows whether one side is thin.
Look for holes
Percentage doesn't tell the whole story. Two patterns can both score 60 percent, but one might be evenly spread and the other clumped in the center with empty spaces near the edge. Look for open gaps big enough for a bird's head and neck, or a clay, to slip through. An even pattern that's a little thinner usually beats a dense center with a ragged edge.
Shoot at least three, and ideally five, sheets with each combination before you decide anything. Shotgun patterns vary from shot to shot, sometimes a lot. One great pattern might be luck. Five consistent ones are a real result.
Patterning for turkeys: Count the kill zone
Turkey hunting is where patterning matters most, because you're shooting at a small target, the head and neck, and a big body full of feathers doesn't count. Instead of a 30-inch circle, many turkey hunters draw a 10-inch circle around the densest part of the pattern and count the pellets inside it. A common goal is about 100 pellets in that 10-inch circle at your planned maximum distance.
Pattern at the distances you expect to shoot, often 20, 30 and 40 yards. Turkey patterns from tight chokes and heavy shot can be surprisingly small up close; at 15 yards your pattern might be the size of a softball, so you can miss a close bird by aiming carelessly. Know how big your pattern is at each distance and where it centers.
Try more than one load. Turkey shells vary widely in shot type, size and price, and a gun that loves one brand may throw blown patterns with another. As of 2025, Iowa limited turkey shot to sizes #4 through #10 in 10- through 20-gauge shotguns, and to #10 or larger in .410 and 28 gauge. That may have changed, so check the current Iowa turkey regulations before you buy. Our guide to turkey hunting ammunition explains the shell choices in detail. Your maximum turkey range is the farthest distance where your load still puts a dense, even pattern on a 10-inch circle, every time.
Patterning for pheasants and ducks: Real distances, real loads
Pheasants
Pheasants often flush close early in the season and farther out late, when they've been pressured. Pattern at 25 and 35 yards with the shell and choke you plan to carry. You're looking for an even pattern with no gaps a bird could fly through, and a center that shows the gun shoots where you look. Many hunters find a modified or improved cylinder choke with good lead or nontoxic loads gives a forgiving pattern for typical pheasant shots. Our guide to pheasant hunting ammunition covers shot sizes and payloads.
Ducks
Ducks require nontoxic shot, and steel behaves differently from lead. It's lighter and harder, so it usually patterns tighter through the same choke. A choke that's perfect with lead can be too tight with steel. Many duck hunters pattern steel through improved cylinder or modified and are surprised how dense it is. Pattern at 25 and 35 yards, the distances where most decoying ducks are taken, and compare. Our guide to duck hunting ammunition and our guide to nontoxic shot in Iowa explain how steel, bismuth and tungsten differ.
Common mistake: Using the tightest choke you own with steel shot "for more range." Steel already patterns tight, and an overly tight pattern is easier to miss with at normal duck distances. Check your choke tube's markings and your gun maker's guidance for steel too; not every choke is rated for it.
What patterning can and can't fix
Patterning tells you where your gun shoots and how well a combination fills the target. If the center is far from your aim, the problem may be gun fit, a bent or misaligned barrel, or a sight issue. Our article on shotgun fit explains how a stock that doesn't fit you moves the pattern on a moving target. If the patterns are full of holes, try a different choke or a different shell before you blame yourself.
What patterning doesn't do is teach you to hit moving targets. Bench patterns test the equipment. Swinging through a crossing bird is a skill you build on clays and in the field. Use both: patterning to make sure the gun is right, and practice to make sure you are.
Patterning one choke with two shells
A two-shell comparison is the simplest useful session. At a safe range with a solid backstop and eye and ear protection, hang a large sheet with a 4-inch aiming dot 30 yards from the muzzle. With the gun on a rest, load one shell and fire one shot at the dot, then unload, open the action and lay the gun down before anyone goes downrange. Three labeled sheets with the same shell and choke, then three more with a second brand or shot size, give you enough to compare. On each, a 30-inch circle around the densest area, with its center marked and the hits counted, shows which shell spreads more evenly and where your gun's pattern centers compared with your aim.
Putting it together
Patterning is a short, cheap test that answers expensive questions. Shoot from a rest, at measured distances, one shell per sheet, at least three sheets per combination. Find the dense center first, then compare it with your aim. Count pellets in a 30-inch circle for general shooting and in a 10-inch circle for turkeys. Look for gaps, not just percentages. Then choose the choke and shell that put an even, dense pattern where you look at the distances you actually shoot, and stay inside that range in the field.
Check your understanding
Try answering these before you open the answer. If you can decide what to do and explain why, you have it.
1. Your pattern is dense, but its center is 8 inches left of your aiming dot on every sheet. What does that tell you?
The combination patterns well, but the gun shoots left for you. Look at gun fit, sights or the barrel before blaming the shell or choke.
2. Two shells both put 60 percent in the 30-inch circle. How do you choose between them?
Look at how evenly the pellets are spread. The one with fewer large gaps, especially near the edge, is usually the better choice.
3. You're patterning a new turkey load. Why count pellets in a 10-inch circle rather than a 30-inch one?
The vital target on a turkey is the head and neck, which is small. A 10-inch circle shows whether enough pellets reach that area at your hunting distance.
4. Your full choke threw a great lead pattern. Why might it be a poor choice with steel duck loads?
Steel patterns tighter than lead through the same choke, so a full choke can make an overly tight pattern at normal duck distances, and not every choke is rated for steel.
5. You shot one beautiful pattern with a new shell. Is that enough to switch?
No. Shot-to-shot variation is large. Shoot at least three to five sheets with the same combination before drawing a conclusion.
Where to go next
To understand why chokes change your pattern, read demystifying shotgun chokes. If your pattern centers away from your aim, shotgun fit explains how the stock affects where the gun shoots. For turkey loads specifically, see our guide to turkey hunting ammunition, and for steel and other nontoxic shot, read nontoxic shot in Iowa.
If this article helped you, we invite you to sign up for email notifications of new blog articles.